123.hp.com/dj1055 - HP printer installation and software setup

HP deskjet 1055 printer designed in an effective way. This affordable printer produces professional quality output. 123.hp.com/dj1055 printer comes with power cord, a black and tri-color cartridge, installation CD and USB cable for connectivity. And the Energy Star certification gives assurance for low power consumption. The printer supports HP Smart app, HP ePrint, Apple AirPrint, Amazon Fire devices, Google Cloud print and Mopria print service plugin. For better quality printing, always use genuine HP ink cartridges for good quality printing. And check if the ink levels are sufficient for printing. Then load same size paper to avoid paper jam error in the future. And make sure the paper settings in the display matches the paper loaded in the paper input tray. Don’t load damaged and bent edge paper.

123-hp-com-dj1055

123.hp.com/dj1055 - Follow the below steps to setup HP deskjet 1055 printer

Step 1 – Unboxing

Step 2 – Lets power ON

  1. First tear the printer package. You can see USB cable, ink cartridges, power cord, ink caution sheet and ink subscription sheet.
  2. Then rotate the box so that you can safely bring the printer outside the box. Slide it out carefully and remove the Styrofoam caps.
  3. Now you can see additional leaflets in the printer package. Tear out the plastic package around the printer.
  4. Next keep in mind the packaging material came along with the printer are recyclable. You can find further details on 123.hp.com/dj1055.
  1. After unboxing take out the power cord and untie it. Then plug in one end of the power cord to the power port of the printer and other end to the direct outlet.
  2. Next place the printer in an even surface. Now power on the printer.
  3. The HP deskjet 1055 printer starts initializing. It takes some time to finish.
  4. Facing issue starting the HP deskjet 1055 printer please visit 123.hp.com/setup 1055.

Step 3 – Ink Cartridge Initialization - 123.hp.com/dj1055

  1. When the printer stops initializing open the ink cartridge access door, wait for the carriage to come and stop in the ink access area.
  2. After that take out the ink cartridge out of its package. Then remove the protective tab from the cartridge.
  3. And keep in mind not to touch those copper contacts. It damages the ink nozzle and electric connection.
  4. Hold the cartridges by its side and snap them into its slot in an upright angle.
  5. Next pull the paper out tray and load aligned stack of paper in the paper input tray with the help of paper width adjuster.
  6. Download printer software from 123.hp.com/setup 1055 or 123.hp.com/dj1055

123.hp.com/dj1055 - Driver Software Installation using HP Easy Start

1. First the HP Easy Start automated installation application for HP printers. Before that make sure printer is in setup mode.
2. Next remove any USB cable connected to the printer and the computer. Open the web browser and enter 123.hp.com/dj1055.
3. In the following install printer software page click “Download”. Now open the HP Easy Start file from downloads bar.
4. Then the file starts extracting the HP installer starts launching. Accept the terms and conditions to start downloading the printer software.
5. After that connect the flat end of the USB cable in your computer and the square end in the printer.

6. The launcher searches your printer and displays the Printer found page. Click “continue”. If you don’t see your printer name in that page you can press “My Printer is not shown”.
7. You can find your printer software and driver from 123.hp.com/dj1055. Call to the HP manufacturer for quick solutions for the installation process.
8. On clicking continue the computer introduces connection with the printer. In the Choose your software and driver page select the appropriate software package needed and click “continue”.
9. Then read and respond to the on screen instructions to set the personal preferences and information.
10. Lastly click finish when the setup completes. HP printer assistant installs automatically for printing and scanning process.

How to set up web services in my printer ?

  1. Initially open the printer control panel. After that press the wireless button and the information button at the same time which prints the network configuration page.
  2. Then find the IP address from the printed page and enter that in the web browser of your computer. Next make sure that computer connected to the same network as that of the printer. 
  3. Now the EWS page 123.hp.com/dj1055 opens in your computer. Then select the Web Services tab. Finally in the Web Services Settings choose Setup and then click continue.

Wireless connection with router using Wi-Fi Protected Setup

Requirements​

  1. A wireless network (802.11b/g/n), network name and network password.
  2. Then Router that contains a WPS switch.
  3. After that install the printer software from 123.hp.com/dj1055 or 123.hp.com/setup 1055.
  4. Lastly a computer that connects to the same network as that of the HP deskjet 1055 printer.

Steps to setup the Wi-Fi Protected Setup

  1. Initially in Push Button Configuration the  method, press and hold the WPS button on the router for few seconds.
  2. Then within two minutes press and hold the Wireless button on your printer for few second and leave it.
  3. Once the connection established between them you can see a steady wireless light in the printer and the router.
  4. Besides for the Pin Method, in the printer press and hold the wireless and information button at the same time which prints the network configuration page.
  5. Next in that page note down the WPS pin. After that press and hold the wireless button in the printer for few seconds and leave it. The wireless button starts blinking.
  6. At that time open the web browser of your computer and enter the WPS pin. Finally wait for few minutes see the wireless light on the printer, the steady light indicates

Wireless connection without router using Wi-Fi Direct​

Requirements

1. First make sure your mobile device contains the printing application, the computer has HP printer software and the printer contains software downloaded from 123.hp.com/dj1055.
2. Second turn on the Wi-Fi Direct in your HP deskjet 1055 printer. Then on the printer control panel press Wi-Fi Direct button.
3. After that press the Wi-Fi Direct button and the information button to print the Wi-Fi Direct guide.
4. Next in that page find the network name and the password.

Steps to setup the Wi-Fi Direct Setup
  1. Initially for Windows, turn on the computer Wi-Fi connection. Then select the Wi-Fi Direct name starting with Direct in the list of network name.
  2. Next enter the network password. And install the printer software and driver from 123.hp.com/setup 1055.
  3. Then in the printer software choose Tools and click Device Setup & Software.
  4. Now choose Connect a new device. Then in the connection option choose Wireless and follow the onscreen instruction to finish the setup and start printing.
  5. Similarly for mac OS, turn on the Wi-Fi Direct in your printer and turn on the Wi-Fi in your computer.
  6. Then if the Wi-Fi is security protected enter the password for your Wi-Fi when prompted.
  7. After that keep in mind while choosing the network name you should choose the network name starting with DIRECT in the front.
  8. Next open System Preferences. Then choose Printers & Scanners and choose your printer name from the list of detected printer in the network.
  9. The printer name you are choosing must have the word “Bonjour” in the right column and click “Add”.

Steps for HP ePrint setup - 123.hp.com/dj1055

  • Initially download the ePrint application for HP printer from 123.hp.com/dj1055. And open the application. The application doesn’t need any further driver installation. It is as simple as sending email.
  • Next to print at any time and from any location use HP ePrint. Before that make sure the printer connected with the active internet connection.
  • Then set up the Web Services. Next press the information button to print the information page.
  • After that in the information page find the email address of your printer. Then open the computer or mobile and open the email application.
  • Now attach the document that needs to print in the email and send it to the printer email address.
  • After that the printer prints the attachment. In addition to that keep in mind if the “TO:” field contains more than one address or any address in the “cc” field, the email won’t print.
Steps for HP AirPrint setup - 123.hp.com/dj1055
  • First check if your Apple device connects to the Wi-Fi network. Here turn on the printer and check the ink cartridge and paper input tray loaded with paper.
  • Then download the AirPrint application from 123.hp.com/dj1055 and open the AirPrint application.
  • Next open the document or photo that needs to print and click the share icon.
  • Now choose the print icon to open the print option and choose Select Printer. Then adjust any print settings and click print.
  • If Wi-Fi network is not available go to settings and click Wi-Fi. Then in the Choose a network tab choose your printer starting with DIRECT in the front.
  • Finally the default password to log in is 12345678. Then continue your print job.
  • Lastly in this process you will be temporarily disconnected from the local internet after the printing process reconnect with the local network.
123-hp-printer-support